Agilent-technologies E4400-60597 Manual de usuario descargar pdf (Pagina 3)

Agilent Technologies Firmware Upgrade Kits E4400-60230 and E4400-60597 for PSG/ESG Signal Generators

Check Signal Generator Functionality

Firmware Upgrade Kits E4400-60230 and E4400-60597 for PSG/ESG Signal

Generators

Introduction

The instructions in this firmware upgrade guide enable you to install the PSG/ESG Upgrade Assistant 5.12 on your

computer from either the Agilent Technologies website or a CD-ROM and upgrade firmware on ESG-B signal generators

with <B.03.20.

NOTE For Agilent E44xxB ESG Signal Generators Models Only

When upgrading Agilent E44xxB ESG signal generators from firmware versions <B.03.20, see, “ESG-B

Firmware Installation For Versions <B.03.20” on page 14.

To upgrade firmware on PSG/ESG signal generators, perform the following procedures:

1. Check signal generator functionality on page 5.

2. Confirm required equipment on page 6.

3. Connect an RS-232, GPIB, or LAN interface to a PC on page 8.

4. Install PSG/ESG Upgrade Assistant 5.12 and firmware files on page 11.

5. Use the PSG/ESG Upgrade Assistant 5.12 with firmware files on page 12.

6. Check signal generator functionality on page 5.

Product Affected: . . . . . . . . . . . . . . . . . . . . . . . . . All

Serial Numbers: . . . . . . . . . . . . . . . . . . . . . . . . . . All

Options: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . All except Option H98

To Be Performed By: . . . . . . . . . . . . . . . . . . . . . . (X) Agilent Technologies Service Center

(X) Personnel Qualified by Agilent Technologies

(X) Customer

Estimated Installation Time: . . . . . . . . . . . . . . . 75 minutes (RS-232), 30 Minutes (GPIB), 3 minutes

(LAN)

Estimated Verification Time: . . . . . . . . . . . . . . . 1 minute

1 2 3 4 5 6 7 8 ... 17 18

Sin comentarios

Agilent-technologies E4400-60597 Manual de usuario Pagina 3