Agilent Technologies 22D Manual de usuario descargar pdf (Pagina 10)

10

Agilent Wedge Probe Adapter

• Easy connection to surface

mount ICs

• Safe, with no chance of shorting

• Mechanically non-invasive contact

• 3-, 8-, and 16-signal versions

• Supports 0.5 mm and 0.65 mm

TQFP and PQFP packages

Problem-free probing

The Agilent Wedge Probe Adapter

eliminates many of the frustra-

tions associated with probing

surface mount components. If

you’ve ever accidentally shorted

IC pins together, experienced

electrical and/or mechanical

problems with soldering small

wires onto leads, or gotten frus-

trated juggling multiple probes

while you’re trying to operate

your scope, the Wedge was

designed with you in mind.

Make the inaccessible accessible

When you use the Wedge, you

don’t have to worry about short-

ing IC pins together on a delicate

component — or worse yet on an

irreplaceable prototype. The

Wedge is easy to insert and it

stays put. There’s no need to

solder small wires onto leads.

The Wedge is mechanically non-

invasive, so you won’t damage the

legs of the IC. Instead, you’ll have

easy access to hard-to-reach

components.

Electrical reliability

The Wedge makes two contact

points with each leg of the IC.

This redundant physical connec-

tion increases the electrical

reliability of the connection. And

the Wedge’s low capacitance and

inductance provides superior

performance to many other

alternatives.

IC Clip Kits

An inexpensive solution for prob-

ing fine-pitch ICs, the 10072A

SMT Kit includes ten IC clips and

two dual-lead adapters that con-

nect the clips directly to 10070-

family probes.

The 10075A 0.5 mm IC Clip Kit is

ideal for connecting to IC’s as fine

as 0.5 mm. The clip body allows

many clips to be mounted side-

by-side. The kit includes four

0.5 mm IC clips and two dual-lead

adapters that connect the IC clips

directly to 10070-family probes.

Agilent Wedge Electrical

Characteristics

Operating Voltage <40 V dc + peak ac

Operating Current 0.5 A maximum

Capacitance 2 pF typical (all except

Between Contacts Agilent E2643A/44A)

4.33 pF typical at 1 MHz

(Agilent E2643A/44A)

Self-Inductance 15 nH typical (all except

Agilent E2643A/44A)

37 nH typical at 1 MHz

(Agilent E2642A/44A)

Cross Coupling -31 dB typical at 100 MHz

(Agilent E2643A/44A)

Contact Resistance <0.1 Ω

Ordering Information

E2613A 0.5 mm Wedge probe

adapter 3-signal, qty 1

E2613B 0.5 mm Wedge probe

adapter, 3-signal, qty 2

E2614A 0.5 mm Wedge probe

adapter, 8-signal, qty 1

E2643A 0.5 mm Wedge probe

adapter, 16-signal, qty 1

E2615A 0.65 mm Wedge probe

adapter, 3-signal, qty 1

E2615B 0.65 mm Wedge probe

adapter, 3-signal, qty 2

E2616A 0.65 mm Wedge probe

adapter, 8-signal, qty 1

E2644A 0.65 mm Wedge probe

adapter, 16-signal, qty 1

10072A SMT kit for 10070 probe

family

10075A 0.5 mm IC clip kit

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16

Comentarios a estos manuales

Sin comentarios