Agilent Technologies 22D Manual de usuario descargar pdf (Pagina 5)

High Frequency Active Differential Probe

Agilent 1130A InfiniiMax High-Performance Active Probe System

• 1.5 GHz InfiniiMax probe system

• InfiniiMax probe amplifier supports

both differential- and single-ended

measurements for a more

cost-effective solution

• Unrivaled InfiniiMax probing

accessories support browsing,

solder-in, and socketed use models

at the maximum performance

available

• Compatible with 6000 Series

oscilloscopes (300 MHz -

1 GHz only)

The 1.5 GHz 1130A InfiniiMax

probe amplifier is a perfect com-

plement to the 6000 Series 1 GHz

models. Its 1.5 GHz bandwidth,

extremely low input capacitance

(0.32 pF), high common mode

rejection and the patented resis-

tor probe tip technology provide

ultra low loading of the DUT and

superior signal fidelity. Agilent’s

innovative InfiniiMax 1130A

differential probe is the easiest-

to-use, and highest performance

probing system available for high-

speed digital design, and repre-

sent a new industry standard for

accuracy, flexibility and reliability.

Designers can achieve 1 GHz sys-

tem bandwidth in conjunction

with 1 GHz 6000 Series oscillo-

scopes even when manually

browsing with the probe or mak-

ing hands-off measurements.

Optional solder-in probe heads

and solder-in sockets as well as

browser configuration provide

full bandwidth at the probe tip.

Specifications

Operating Characteristics

Probe Bandwidth (–3dB) > 1.5 GHz

Rise and Fall Time (10% to 90%) 233 psec

System Bandwidth (–3dB) 1130A with MSO/DSO610xA: 1 GHz

Input Capacitance Cm = 0.1 pF Cm is between tips

Cg = 0.34 pF Cg is ground for each tip

Cdiff = 0.27 pF Differential mode capacitance = Cm + Cg/2

Cse = 0.44 pF Single-ended mode capacitance = Cm + Cg

Input Resistance Differential mode resistance = 50 kΩ ±1%

Single-ended mode resistance = 25 kΩ ±1%

Input Dynamic Range ±2.5 V

Input Common Mode Range ±6.75 V dc to 100 Hz; ±1.25 V > 100 Hz

Maximum Signal Slew Rate 18 V/ns when probing a single-ended signal

30 V/ns when probing a differential signal

DC Attenuation 10:1 ± 3% before calibration on oscilloscope

10:1 ± 1% after calibration on oscilloscope

Offset Range ± 12.0 V when probing single-ended

Maximum Input Voltage 30 Vpeak, CAT I

ESD Tolerance >8 kV from 100 pF, 300 Ω HBM

Maximum Number of Probes 2

Supported by 6000 Series

Agilent 1130A InfiniiMax probe offers you the highest performance available for

measuring differential and single-ended signals.

1 2 3 4 5 6 7 8 9 10 ... 20 21

Comentarios a estos manuales

Sin comentarios

Agilent Technologies 22D Manual de usuario Pagina 5

Comentarios a estos manuales

Relacionado con productos y manuales para De medición, control y control Agilent Technologies 22D