Agilent Technologies 86100B Manual de usuario descargar pdf (Pagina 14)

Factory Calibrated Accuracy ±5% ±100 nW ± connector uncertainty,

20°C to 30°C

User Calibrated Accuracy ±2% ±100 nW ± power meter uncertainty ± connector uncertainty,

<5°C change

Maximum Input Power

Maximum displayed peak

8 mW (+9 dBm)

Maximum non-destruct peak 50 mW (+17 dBm), or 0.25pJ per pulse

Maximum non-destruct average 10 mW (+10 dBm)

Fiber Input 9/125 µm, user selectable connector type

Input Return Loss

(HMS-10 connector fully filled single mode fiber) 30 dB

ELECTRICAL CHANNEL SPECIFICATIONS

Electrical Channel Bandwidth 26 and 50 GHz

Transition Time

(10% to 90% calculated from TR = 0.35/BW) <14 ps, 26 GHz

(Characteristic) 7 ps, 50 GHz

RMS Noise

Characteristic 0.25 mV, 26 GHz

0.60 mV, 50 GHz

Maximum 0.50 mV, 26 GHz

1 mV, 50 GHz

Scale Factor (full height is eight divisions)

Minimum 1 mV/division

Maximum 100 mV/division

dc Accuracy

(single marker)

26 GHz ±0.4% of full scale

±2 mV ±1.5% of (reading -channel offset)

50 GHz ±0.4% of full scale

±2 mV ±2% of (reading -channel offset)

dc Difference

(two markers)

26 GHz ±0.8% of full scale, ±1.5% of delta

50 GHz ±0.8% of full scale, ±2% of delta

dc Offset Range

(referenced from center screen) ±500 mV

Input Dynamic Range

(relative to channel offset) ±400 mV

Maximum Input Power 16 dBm ±2 Vdc

Nominal Impedance 50 ohm

Reflections - (for 30 ps rise time) 5%

Electrical Input Connector 2.4 mm

Specified with 8 point moving average. The frequency step is 200 MHz.

Measured with optical pulses with 5 ps FWHM, 10Gb/s repetition rate, and 2 mW peak power.

Measured with modules set at 1310nm O/E conversion (responsivity) mode.

Maximum non-destruct power is related to the fill factor (duty cycle) of the RZ waveform. The factory specification is defined with using a 20% filled 40GB/s pulse train (i.e. 5ps FWHM and

25ps period). This concept can also be specified as maximum non-destruct pulse energy. The factory specification is specified with 5ps FWHM optical pulses and maximum non-destruct power

providing that the individual pulse shape is square.

86109B 40Gb/s Optical Receiver Module Specifications (continued)

1 2 ... 9 10 11 12 13 14 15 16

Comentarios a estos manuales

Sin comentarios

Agilent Technologies 86100B Manual de usuario Pagina 14

Comentarios a estos manuales

Relacionado con productos y manuales para De medición, control y control Agilent Technologies 86100B