Agilent Technologies DC110 Manual de usuario descargar pdf (Pagina 6)

Available Accessories – for Calibration and Maintenance

Description Model Number

Requires

(Instrument

must already

include the

following)

Additional Information

Open Termination 42090A None 4-terminal pair Open termination. Required for

performing calibration.

Short Termination 42091A None 4-terminal pair Short termination. Required for

performing calibration.

4-Terminal Pair Standard

Capacitor Set

16380A None 1 pF, 10 pF, 100 pF and 1000 pF standard capacitor set

with carrying case. Calibration report and Operation

Note are furnished.

4-Terminal Pair Standard

Capacitor Set

16380C None 0.01 μF, 0.1 μF and 1 μF standard capacitor set with

carrying case. Calibration report and Operation Note

are furnished.

16380C-001 None Adds 10 μF standard capacitor.

4-Terminal Pair Standard

Resistor Set

42030A None 9 standard resistors from 1 mΩ to 100 kΩ in decade

steps; Carrying case, calibration report and Operation

and Service Manual are furnished.

Performance Test Kit 16190A None Contains 7 mm Open, Short, 50 Ω Load terminations,

calibrated air-line, wrench, calibration data diskette,

carrying case and Operation Note.

4 Terminal Pair to BNC

Interface Box

04294-61002 None Terminal Adapter for test signal and DC bias

performance tests

Note: For more detailed information, refer to Accessories Selection Guide for Impedance Measurements

1 2 3 4 5 6 7 8

Sin comentarios

Agilent Technologies DC110 Manual de usuario Pagina 6