Agilent Technologies N2782A Guía de usuario descargar pdf (Pagina 6)

N2779A Power Supply

Operation

To Connect the N2779A

1 Position the N2779A so that the power switch and power

cord may be easily reached.

2 Turn the power switch off and connect the power cord.

WARNING Use only the supplied power cord.

3 Connect the power plug of your probe to one of the

N2779A’s front- panel probe- power connectors. Up to three

probes may be connected to the N2779A.

4 Turn the N2779A’s rear- panel power switch on, and check

that the front- panel power indicator is lit.

To Disconnect Power

1 Turn the N2779A’s power switch off.

2 Disconnect the power plugs of all connected probes from the

N2779A.

3 Disconnect the power cord from the N2779A.

4 The Appliance Coupler is the equipment disconnect device.

Position the equipment so that the Appliance Coupler is free

from obstruction.

To Clean the Instrument If the N2779A requires cleaning, perform the following steps:

1 Remove power from the instrument.

2 Clean the external surfaces of the instrument with a soft,

dry cloth.

3 Make sure that the instrument is completely dry before

reconnecting it to a power source. Do not attempt to clean

the current probes.

1 2 3 4 5 6 7 8 9 10 11 ... 19 20

Sin comentarios

Agilent Technologies N2782A Guía de usuario Pagina 6