Agilent Technologies Agilent 4396B Manual de usuario descargar pdf (Pagina 5)

Network analyzer specification Spectrum analyzer specification Impedance analyzer specification

Frequency range 10 Hz to 500 MHz

Frequency range 10 Hz to 500 MHz Frequency range 100 kHz to 500 MHz

Frequency resolution 1 mHz Noise sidebands < –104 dBc/Hz Meas. parameter |Z|, θz, R, X, |Y|,

typical at 10 kHz θy, G, B, Cs, Cp, Ls,

offset Lp, Rp, Rs, X, D, Q,

IΓI, Γx ,Γy

Output power range –50 to 15 dBm Resolution bandwidth 1 Hz to 1 MHz in Z accuracy ±3% (typical,

1-3-10 steps basic accuracy)

Dynamic range 115 dB @ 10 Hz IFBW Dynamic range > 100 dB third-order Source level –56 dBm to

free dynamic range +9 dBm (at DUT)

Dynamic accuracy ±0.05 dB/0.3 deg. Level accuracy ±0.8 dB @ 50 MHz DC bias ±40 V (20 mA (max))

Calibration Full two-port Sensitivity –145 dBm/Hz (Option 4395A-001

@ freq. = 10 MHz DC source or external

DC source is required.)

Compensation OPEN/SHORT/LOAD

port extension

Standard features: Instrument BASIC, GPIB port, 3.5" floppy disk drive, direct print, RAM disk, VGA monitor output.

Optional features: Impedance measurement (Option 4395A-010), time-gated spectrum analysis (Option 4395A-1D6), high-stability frequency

reference (Option 4395A-1D5), 50 Ω to 75 Ω spectrum input impedance conversion (Option 4395A-1D7), DC source

(±40 V, 100 mA (ALC)) (Option 4395A-001).

1. 100 kHz to 500 MHz if using the Agilent 87511A/B S-parameter test set.

2. With Option 4395A-010 and the Agilent 43961A RF impedance test kit

Network analyzer specification Spectrum analyzer specification Impedance analyzer specification

Frequency range 100 kHz to 1.8 GHz

Frequency range 2 Hz to 1.8 GHz Frequency range 100 kHz to 1.8 GHz

Frequency resolution 1 mHz Noise sidebands < –113 dBc/Hz Meas. parameter |Z|, θz, R, X, |Y|,

typical at 10 kHz θy, G, B, Cs, Cp,

offset Ls, Lp, Rp, Rs, X,

D, Q, IΓ I, Γx,Γy

Output power range –60 to 20 dBm Resolution bandwidth 1 Hz to 3 MHz in Meas. range 2 Ω to 5 kΩ

1-3-10 steps

Dynamic range > 120 dB @ 10 Hz Dynamic range > 100 dB third-order Z accuracy ±3% (typical,

IFBW dynamic range basic accuracy)

Dynamic accuracy ±0.05 dB/0.3 deg. Overall level accuracy < ±1.0 dB Source level –66 dBm to

Calibration Full two-port Sensitivity < –147 dBm/Hz +14 dBm (at DUT)

@ freq. = 1 GHz DC bias ±40 V (20 mA (max))

(External DC bias

source is required.)

Compensation OPEN/SHORT/LOAD

port extension

Standard features: Instrument BASIC, GPIB port, 3.5" floppy disk drive, direct print, RAM disk, VGA monitor output.

Optional features: Impedance measurement (Option 4396B-010), time-gated spectrum analysis (Option 4396B-1D6), high-stability frequency

reference (Option 4396B-1D5), 50 Ω to 75 Ω spectrum input impedance conversion (Option 4396B-1D7).

1. 300 kHz to 1.8 GHz if using the Agilent 85046A/B S-parameter test set.

2. With Option 4396B-010 and the Agilent 43961A RF impedance test kit.

Major Specifications

Agilent 4395A

Agilent 4396B

1 2 3 4 5 6 7 8 9 10 ... 15 16

Comentarios a estos manuales

Sin comentarios

Agilent Technologies Agilent 4396B Manual de usuario Pagina 5

Comentarios a estos manuales

Relacionado con productos y manuales para Multímetros Agilent Technologies Agilent 4396B