Agilent Technologies E7495A RF Manual de usuario Pagina 14

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 16
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 13
14
Display
Transflective VGA color LCD
Physical dimensions
Height: 11.6 in, 295 mm
Width: 14.5 in, 368 mm
Depth: 5.3 in, 135 mm
Weight (without batteries): 20 lbs, 9.1 kg, fully hardware optioned
Power
Power supply
Internal: Lithium ion battery: 10.8 volts, 6.0 Ah
(1 NI2040AG shipped standard, will
accept two batteries)
External DC input: +9 V to +25 V DC 4 amps
Battery life: Approximately 1.5 per battery
(time varies dependent upon instrument mode)
Interface ports
Two RS 232 (DB-9) (reserved for future use)
Two USB 1.1 (reserved for future use)
One LAN port: 10 base T
Built-in speaker
PCMCIA card slot
Compact flash memory (type 1 & 2)
Stereo headphone jack
General purpose input/output: TTL level (reserved for future use)
Inputs
Port 2 RF in: 50 Ω, type N
External DC input: +9 V to +25 VDC 4 amps
Frequency reference:
Input power: –10 to + 10 dBm
Connector: 50 Ω BNC
Even second:
Connector: High impedance BNC
Level: TTL compatible
GPS antenna:
Connector: SMA
Output: 5 V at 50 mA
Outputs
Port 1 RF out/SWR:
Connector: 50 Ω, type N
Power reference: 50 Ω type N; SWR < 1.06
Optional connectors
Option 600 power meter
Outputs: Type N 50 Ω power reference
Inputs: Sensor input for 8480 series sensors
Option 700 T1 analyzer
Outputs: (2) Bantam outputs; TX primary and secondary
Inputs: (2) Bantam inputs; RX primary and secondary
Option 710 E1 analyzer
Outputs: (2) 75 Ω BNC outputs; TX primary and secondary
Inputs: (2) 75 Ω BNC inputs; RX primary and secondary
Operating temperature
Specified temperature range:
–10 to 50 °C; 14 to 122 °F
Storage temperature
–40 to 70 °C; –40 to 158 °F
Calibration
Cycle: one year
Warranty
Duration: one year
Ordering information – E7495B base station test set
Standard test set functionality includes spectrum analysis and antenna
measurements
Standard accessories include:
PCMCIA 64 MB flash memory card
• AC/DC converter
NI2040AG lithium ion battery
• GPS antenna
10 dB Coaxial attenuator (Q2)
Coax 50 Ω terminated N-male
Open/short M type N
Adapter storage box
• Shoulder strap
Documentation (CD ROM)A
2’ M-N to M-N cables (Q2)
10’ M-N to M-N cable
N-female to N-female barrel (Q2)
• Adapters
Ordering information – options
Note: Upgrade options for the E7495A/B use the designation E7495XU before
the respective option number.
E7495B-200 cdmaOne and CDMA2000 1X TX analyzer
E7495B-205 CDMA2000 1xEV-DO analyzer (RX testing requires Option 510,
adds OTA functionality if Option 210 is selected)
E7495B-210 cdmaOne, CDMA2000 1X over-the-air test (requires Option 200,
recommend 810/811/812 or equivalent)
E7495B-220 Channel scanner
E7495B-230 GSM TX analyzer
E7495B-235 EDGE TX analyzer
E7495B-240 W-CDMA (UMTS) TX analyzer
E7495B-245 HSDPA TX analyzer
E7495B-250 W-CDMA (UMTS) over-the-air test (requires Option 240,
recommend 813 or equivalent)
E7495B-270 Interference analyzer
E7495B-300 DC Bias
E7495B-330
Nortel CDMA base station software (requires Option 200, 510, 600)
E7495B-500 CW signal generator
E7495B-510 CW, cdmaOne, CDMA2000 1X, CDMA2000 1xEV-DO, iDEN
(requires Option 205) reverse link signal generator
E7495B-600 Power meter (requires power sensor)
E7495B-700 T1 analyzer
E7495B-710 E1 analyzer
E7495B-801 Soft carry case
E7495B-802 Backpack
E7495B-803 40 dB 100 W attenuator
E7495B-805 Paper manual
E7495B-810 Cellular antenna and pre-selector filter for Option 210
E7495B-811 PCS antenna and pre-selector filter for Option 210
E7495B-812
Korean PCS antenna and pre-selector filter (required for Option 210)
E7495B-813 Antenna and pre-selector filter (required for Option 250)
E7495B-820 Battery pack, external battery charger, DC car adapter
E7495B-840 Transit case
E7495B-51B Return to Agilent repair
E7495B-50C Return to Agilent calibration
N8482A-CFT Power sensor
General
Vista de pagina 13
1 2 ... 9 10 11 12 13 14 15 16

Comentarios a estos manuales

Sin comentarios