Agilent Technologies 1100 Series Información técnica descargar pdf (Pagina 15)

Connecting the Hardware

Connecting the Ethernet Communication Cables

Thermo Scientific Agilent 1100 Series Connecting the Hardware and Triggering Data Acquisition 7

Connecting the Ethernet Communication Cables

Y To connect the Ethernet communication cable to an Agilent 1100 Series LC

1. Connect a category 5, shielded Ethernet cable from the JetDirect 400N network card to

the Ethernet switch.

2. Connect a category 5, shielded Ethernet cable from the Ethernet switch to the Ethernet

card in the computer dedicated to the LC system (typically network interface card

number 3). Figure 3 shows the Ethernet connections.

Figure 3. Ethernet connections

CAUTION To comply with safety and EMC regulations, you must use category 5,

shielded Ethernet cables to make the Ethernet connections for your instrument.

HEWLETT

PACKARD

JET DIRECT 400N

BNC

100 (RJ-45)

HEWLETT

PACKARD

JET DIRECT 400N

Not drawn to scale

USB

ENET

Cat5 shielded

Ethernet cables

Ethernet Switch

JetDirect 400N card

(installed in one of

the Agilent modules)

Computer

Optiplex GX520

(subject to change)

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 29 30

Sin comentarios

Agilent Technologies 1100 Series Información técnica Pagina 15