Agilent Technologies E8257D/67D Guía de instalación descargar pdf (Pagina 21)

Chapter 3 15

Operation Verification

Checking the Maximum Leveled Power

10. Press Return > Sweep > Freq. The SWEEP annunciator is now on and a continuous sweep will begin.

During the sweep, the progress bar becomes active on the display, indicating the status of the

current sweep.

11. Watch the display and ensure that the Unlevel annunciator does not appear at any time during

a full sweep.

The Unlevel annunciator may turn on and off, or remain on; both conditions indicate a failure.

If this occurs, refer to “Maximum Leveled Power Check Failure” on page 18 for further

instructions.

12. Press

Sweep > Off.

13. Repeat steps 5 through 12 for each frequency range specific to your instrument model number

and options.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 33 34

Sin comentarios

Agilent Technologies E8257D/67D Guía de instalación Pagina 21