Agilent Technologies C-Size VXIbus Systems Manual de usuario descargar pdf (Pagina 29)

Terminal Module

Option A3E

Option A3E can be ordered if a crimp-and-insert terminal module is desired.

This allows you to crimp connectors onto wires which are then inserted

directly into the breadboard’s mating connector. Refer to the schematics in

Appendix B to make the connections.

Crimp-and-Insert

Terminal Module

Accessories

The following accessories are necessary for use with crimp-and-insert

Option A3E:

Single-Conductor and

Contact

A crimp-and-insert contact is crimped onto one end of a wire. The other

end is not terminated. Order Agilent 91510A.

Shielded-Twisted-Pair

and Contacts

A crimp-and-insert contact is crimped onto each conductor at one end of a

shielded-twisted-pair cable. The other end is not terminated. Order Agilent

91511A.

Figure 2-16. Crimp-and-Insert Connector

Length: 2 meters

Wire Gauge: 24 AWG

Quantity: 50 each

Insulation Rating: 105°C maximum

Voltage: 300 V

Length: 2 meters

Wire Gauge: 24 AWG

Outside Diameter: 0.1 inch

Quantity: 25 each

Insulation Rating: 250°C maximum

Voltage: 600 V

Chapter 2 Configuring the Agilent E1490C 27

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 81 82

Sin comentarios

Agilent Technologies C-Size VXIbus Systems Manual de usuario Pagina 29