Agilent Technologies X/P/K281C Manual de usuario descargar pdf (Pagina 17)

Specification 3

Agilent X/P/K281C Adapters Operating and Service Manual 17

Figure 3- 1 shows the variation in SWR introduced by the

center conductor gap.

Figure 3-1 Typical SWR Variation Versus Center Conductor Gap

Typical insertion loss 0.08 dB 0.10 dB 0.12 dB

Maximum peak power

†

200 W 200 W 100 W

EIA WR90 WR62 WR42

Equivalent flange type UG-135/U UG-419/U UG-597/U

Alignment holes 4 holes (6 holes for option 006

‡

)

Connector type:

Standard

Option 012

Option 013

Option 106

7-mm

N-male

N-female

Not available

7-mm

Not available

3.5 mm female

3.5 mm male

Not available

3.5 mm male with 6

alignment holes

* Specifications in this table are measured with no gap between the full diameters of the male and female center conductors.

† The power that can be handled will be a function of the size of the center conductor. The majority of the heat flow will be via

conduction. The weak point is the coax portion. The waveguide portion is capable of higher power. These numbers are as-

suming an ambient temperature of 25 °C and an altitude of sea level. Higher ambient temperatures and altitude would de-

grade power-handling capability.

‡ Option 006 is only available for the standard connector type.

Table 3 - 1 Specifications (continued)

Model X281C P281C K281C

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 31 32

Sin comentarios

Agilent Technologies X/P/K281C Manual de usuario Pagina 17