Agilent-technologies J3972A Manual de usuario descargar pdf (Pagina 49)

Local Terminal Configuration

Using a Local Terminal

Full/Half Press

and select the line type as Half-Duplex or Full-

Duplex Duplex. This parameter is not available unless the 10MB/s or

100MB/s option was selected for the Link Speed parameter.

Parameters do not take effect until you select the Save Changes and Exit

menu item.

3. Press

to save the configuration changes and return to the probe’s Main

Menu. If you want to cancel your current changes and return to the probe’s

Main Menu, press

Token-Ring Telemetry Interface Configuration

If the optional Token-Ring telemetry interface is not installed, skip this section

and continue with “OC-3 ATM Interface Configuration” on page 33. Otherwise,

use the following procedure to configure items in the Modify/View Interface

Values menu for the Token-Ring Telemetry Interface:

1. Press

to access the Modify/View interface values menu item. The

Modify/View Interface Values menu is displayed, as shown in Figure 2-6 on

page 30.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 188 189

Sin comentarios

Agilent-technologies J3972A Manual de usuario Pagina 49