Agilent-technologies Wireless Network Optimization Platform E6474A Manual de usuario descargar pdf (Pagina 38)

38 Agilent E6474A User’s Guide

3 Set Up Your System

Follow the manufacturer’s instructions for installing the

pulse trigger device. Connections to the receiver are shown

in Figure 17.

• If you have two receivers, connect the pulse trigger cable

(E7450- 60015) to the R

X LOOP IN and RX LOOP OUT ports

as shown in Figure 17.

• Or, if you have one receiver, connect the pulse trigger

cable to the R

X LOOP IN and RX LOOP OUT ports of the

same receiver.

• Connect the cable from the pulse trigger device to the

BNC connector of the pulse trigger cable. For software

configuration and calibration instructions, refer to the

online help. Search for “wheel pulse unit setup” to locate

the information.

Figure 17 Connecting the pulse trigger cable

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 193 194

Sin comentarios

Agilent-technologies Wireless Network Optimization Platform E6474A Manual de usuario Pagina 38