Agilent Technologies 54502A Manual de servicio descargar pdf (Pagina 62)

6. Press RUN. The timing analyzer acquires data and shows glitches for

channels under test as in figure 3-34. SELECT Delay field and rotate knob

to assure consistent glitch detection.

Note If sample clock and data synchronize, glitches may be displayed on the timing

screen as valid data transitions.

7. Remove the probe tip assembly from the logic analyzer probe cable and

attach to the next logic analyzer probe cable to be tested. Take care not to

dislodge grabbers from the test connector.

8. Repeat steps 3, 4, and 6 until all pods have been tested (pods 1 through 5).

Make sure to assign correct pod to be tested in System Configuration.

9. Disconnect lower eight bits (bits 0 through 7) from test connector. Attach

upper eight bits (bits 8 through 15) to the test connector.

10. Repeat steps 3, 4, 6 and 7 until the upper bits of all pods have been tested

(pods 1 through 5).

Figure 3-34. Glitch Test Timing Waveforms

HP 1650B/1651B Performance Tests

Service Manual 3-27

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 110 111

Sin comentarios

Agilent Technologies 54502A Manual de servicio Pagina 62