Agilent Technologies Router E6385A Manual de usuario descargar pdf (Pagina 120)

Troubleshooting

Errors When Loading and Running the Test Software

Chapter 6

O:\Manuals\E6385A_Cdma\Book\Trouble.fm

122

Errors When Loading and Running the Test Software

This group of errors would most often be encountered before the Main Menu appears.

Such errors would be most likely to occur the first time that you load and run the Test

Software (see Chapter 2, “Installation,” on page 21). The errors are presented with the

error text, followed by a description of the cause, followed by some possible solutions.

• Symptom: Memory Overflow Errors

The random access memory (RAM) space of the Test Set is shared by IBASIC

programs and save/recall registers. If you have saved a large number of registers in

the Test Set, a memory overflow error might occur when you first attempt to load the

Test Software.

To correct this, clear some RAM space by deleting some or all of the saved registers.

You may do this selectively (one register at a time) or globally (all storage registers at

once).

NOTE Clearing the registers, whether selectively or globally, is permanent. Registers are not

retrievable once deleted. You may save registers to an SRAM card, as well. Refer to

the Agilent Technologies 8935 Reference Guide for instructions on this procedure.

To delete a single register:

Step 1. Press the

Recall key.

Step 2. Scroll the cursor to the register to be deleted.

Step 3. Press the

Yes On/Off key to indicate that you wish to clear the register.

Step 4. Press the

Yes On/Off key again to confirm.

Step 5. The register will be cleared.

To delete

all

saved registers:

Step 1. Press the

Recall key.

Step 2. Scroll to *Clr All* and press the knob.

Step 3. Press the

Yes On/Off key to confirm.

Step 4. All save registers will be cleared.

1 2 ... 115 116 117 118 119 120 121 122 123 124 125 ... 128 129

Sin comentarios

Agilent Technologies Router E6385A Manual de usuario Pagina 120