Agilent Technologies U1401B Manual de usuario descargar pdf (Pagina 6)

U1401B Quick Start Guide

Performing Resistance Measurement and

Continuity Test

CAUTIONCAUTION

Disconnect circuit power and discharge all high-voltage

capacitors before measuring resistance to prevent possible

damage to the instrument or the device under test.

1 Set the rotary switch to .

2 Connect the red (+) and black (–) test

leads to the INPUT terminals.

3 Probe the resistor (or shunt) leads and

read the display.

4 To perform continuity test, press

to toggle the audible continuity function

on or off.

For continuity test, the instrument will beep if

the resistance is less than the values

indicated below:

Measurement range Resistance threshold

500.00 Ω 10 Ω

5.0000 kΩ 100 Ω

50.000 kΩ 1 kΩ

500.00 kΩ 10 kΩ

5.0000 MΩ 100 kΩ

50.000 MΩ 1 MΩ

1 2 3 4 5 6 7 8 9 10

Sin comentarios

Agilent Technologies U1401B Manual de usuario Pagina 6