Agilent Technologies U1401B Manual de usuario descargar pdf (Pagina 8)

U1401B Quick Start Guide

Frequency and Frequency Counter

Measurements

Autoscan and autoramp outputs

The voltage and current outputs can also be generated in predefined steps

or ramp. Refer to the User's and Service Guide for the detailed procedures.

NOTE

The U1401B can generate and measure signals simultaneously.

While the mode is enabled, pressing

disables the U1401B output by placing it in the standby mode

( ). Pressing OUTPUT again toggles the output on ( ).

Constant voltage output

1 Set the rotary switch to any one of the

positions.

2 Press . The annunciator

appears.

3 Press to cycle through ±1.5 V,

±15 V, ±1.5 V, ±15 V,

±1.5 V, and ±15 V output

modes.

4 Select ±1.5 V or ±15 V.

5 Press to output the signal.

Constant current output

1 Set the rotary switch to any one of the

positions.

2 Press . The annunciator

appears.

3 Press to cycle through ±25 mA,

±25 mA, and ±25 mA

output modes.

4 Select ±25 mA.

5

Press to output the signal.

1 2 3 4 5 6 7 8 9 10

Comentarios a estos manuales

Sin comentarios