Agilent Technologies N2782B Especificaciones descargar pdf (Pagina 9)

InﬁniiMode Active Probes and Accessories

N2750A-52A InﬁniiMode probe

• 1.5 - 6 GHz bandwidth

• Dual attenuation ratio (2:1/10:1)

• InfiniiMode probing for making

differential, single-ended and

common mode measurements with

a single probe

• Built-in quick action scope control

for quick access to a variety of

scope functions

• Built-in headlight

• Includes solder-in, browser, and

socketed tips standard

• AutoProbe interface for auto

configuration and probe power

The N2750A Series InfiniiMode

differential probe is a new generation

of low-cost, differential active probe

compatible with InfiniiVision 3000 X-,

4000 X-, 6000 X-Series and Infiniium

oscilloscope’s AutoProbe interface.

Measurement versatility

The N2750A Series InfiniiMode probe

offer 2:1 and 10:1 dual attenuation

settings, allowing them to be used for

a broad range of applications. Dual

attenuation range is automatically

configured depending on the size of

the input signal.

The new differential probe has

an input resistance of 200 kΩ

(differential) or 100 kΩ (each input to

ground) and an extremely low input

capacitance of 700 fF to minimize

circuit loading.

This, accompanied with superior

signal fidelity, makes these probes

useful for most digital design and

debug applications. And with their

wide dynamic range (10 Vpp) and

offset range (±15 V), these probes

can be used in a wide variety of

analog signal measurements as well.

InfiniiMode usability

The N2750A comes with new

InfiniiMode operation modes. The

InfiniiMode allows convenient

measurements of differential, single-

ended, and common mode signals

with a single probe tip without

reconnecting the probe to change

the connection. The N2750A probe’s

InfiniiMode provides the following

modes of operation.

• A – B (differential),

• A – ground (single-ended A)

• B – ground (single-ended B)

• (A+B)/2 – ground (common mode)

Quick action scope control

The N2750A Series InfiniiMode probe

provides convenient and quick access

to various functions on the scope.

You often have a need to control the

scope while you hold a probe in your

hand. With the quick action scope

control feature built into the probe,

you can turn the built-in headlight of

the probe on and off, or control some

frequently used scope functions

such as RUN/STOP, auto scale,

quick print, quick save, etc. with only

a button press on the probe. Get

control of your most needed function

with a push of the quick action

control button on the probe.

Flexibility in probe use models is also

a vital necessity. The probes come

standard with three different types of

exchangeable probe tips that allow

for easy connections to the circuit

under test. These probe tips enable

you to access multiple signals on

anything from header connectors to

hard-to-reach, high-density circuitry.

The probes are equipped with a white

LED headlight to illuminate the circuit

under test which will help you see

where you are probing.

This probe is compatible with

InfiniiVision 3000 X-Series with

software ver 2.2 or above, 4000

X-Series with software ver 3.01

or above, and 6000 X-Series with

software ver. 6.00.

Ordering information for InfiniiMode

probes and accessories

N2750A 1.5 GHz InﬁniiMode

differential probe

N2751A 3.5 GHz InﬁniiMode

differential probe

N2752A 6 GHz InﬁniiMode

differential probe

N2776A Differential browser tips

(qty 3)

N2777A InﬁniiMode solder-in tips

(qty 3)

N2778A InﬁniiMode socketed tips

(qty 3)

N4822A Socketed tip for USB/

Ethernet application ﬁxtures

(qty 1)

Each probe includes two solder-in tips,

one socketed tip and one browser tip.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 25 26

Comentarios a estos manuales

Sin comentarios

Agilent Technologies N2782B Especificaciones Pagina 9

Comentarios a estos manuales

Relacionado con productos y manuales para Multímetros Agilent Technologies N2782B