Agilent Technologies 54502A Manual de servicio Pagina 30

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 111
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 29
4. Select the HP-IB Address field with the KNOB and press the SELECT key.
5. When the pop-up field appears on screen, rotate the KNOB to select the
desired HP-IB address.
6. Press the SELECT key to enter the new address.
7. Select the DONE field in the upper-right corner with the KNOB to exit the
External I/O Port Configuration menu.
RS-232-C
Interface
The HP 1650B/51B interfaces with RS-232-C communication lines through a
standard 25 pin D connector. The HP 1650B/51B is compatible with RS-232-C
protocol. When a hardwire handshake method is used, the Data Terminal Ready
(DTR) line (pin 20 on the Computer/Modem connector) is used to signal whether
space is available in the logical I/O buffer for more data. Pin outs of the RS-232-C
connectors are listed in table 2-4.
Figure 2-4. External I/O Port Configuration Menu
HP 1650B/1651B Installation
Service Manual 2-7
Vista de pagina 29
1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 110 111

Comentarios a estos manuales

Sin comentarios