Agilent Technologies 81134A Guía de usuario Pagina 59

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 92
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 58
Setting Up Signals for a Stressed Eye Diagram Measurement Setting Up Generic and Advanced Signals
Agilent 81133A/81134A Pulse Generator User’s Guide, September 2008 59
Connecting the Instruments
Connect the Pulse Generator, the Arbitrary Waveform Generator
and the DCA as follows:
CAUTION Before disconnecting/connecting any cables make sure that the
81134A output channels are turned off!
In detail:
1 Connect the 33250A output to the channel 2 delay control input
of the 81134A (use the BNC- SMA adaptor and a 20 dB
attenuator).
2 Connect a 20 dB attenuator each to the channel 1 and the
trigger input of the DCA.
3 Connect the 81134A channel 2 output to the DCA’s channel 1
input.
4 Connect the 81134A trigger output to the DCA’s trigger input.
5 Power on the three units after you have made all connections.
86100 DCA
Channel 1 Channel 2
Trigger In
Input
20 dB Attenuator
81134A Pulse Generator
Channel 2
Delay Control
Input
Channel 1
Output
TrigOut
33250A
Arbitrary Waveform Generator
BNC-SMA Adaptor and 20 dB Attenuator
Vista de pagina 58
1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 91 92

Comentarios a estos manuales

Sin comentarios