Agilent Technologies Sprinkler 54753a Manual de usuario descargar pdf (Pagina 37)

Command

:MEASure:VRMS[?] {CYCLe | DISPlay}, {AC | DC}

[,<source>]

Measures the RMS voltage of the selected waveform by subtracting the

average value of the waveform from each data point on the display.

{CHANnel<number> | FUNCtion<number> |

RESPonse<number> | WMEMory<number>}

For channels: an integer, 1 through 4, indicating the slot in which the channel

resides, followed by an optional A or B identifying which of two possible

channels in the slot is being referenced. For functions: 1 or 2. For waveform

memories (WMEMory): 1, 2, 3, or 4. For TDR responses: 1, 2, 3, or 4.

Command

:MEASure:VTIMe[?] <time>[,<source>]

Measures the voltage at the specified time. The time is referenced to the

trigger event and must be on the screen. When FFT is the specified source,

the value at the specified frequency is measured.

<time>

Displayed time from the trigger in seconds, or frequency in Hertz for FFT.

{CHANnel<number> | FUNCtion<number> |

RESPonse<number> | WMEMory<number> | FFT}

For channels: an integer, 1 through 4, indicating the slot in which the channel

resides, followed by an optional A or B identifying which of two possible

channels in the slot is being referenced. For functions: 1 or 2. For waveform

memories (WMEMory): 1, 2, 3, or 4. For TDR responses: 1, 2, 3, or 4.

Measure Commands

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 43 44

Sin comentarios

Agilent Technologies Sprinkler 54753a Manual de usuario Pagina 37