Agilent Technologies 3070 Manual de instalación descargar pdf (Pagina 24)

Chapter 1: MS Windows System Installation Procedure: Preparing the Testhead

Preparing the

Testhead

This section contains:

■ Install the Footswitch, 1-18

■ Install the Probe and Probe Cradle, 1-19

■ Install the Fixture Pull-Down Label -- Non-English

Only, 1-19

■ Attach the Site LAN Cable, 1-20

Install the Footswitch

NOTE

With software revision 3070 05.20p and later, the

footswitch must be connected to the system. The

footswitch must be pressed to lock fixtures on the

testhead.

1 Locate the footswitch and cable that are coiled on the

front of the testhead cradle.

See Figure 1-6 for locations.

2 Unpack the footswitch and place it on the floor in

front of the testhead.

Figure 1-6 Location of the footswitch and leveling foot

Footswitch Cable coiled

under front of testhead

Testhead Leveling Foot

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 115 116

Sin comentarios

Agilent Technologies 3070 Manual de instalación Pagina 24