Agilent Technologies U4154A Guía de instalación descargar pdf (Pagina 32)

32 U4154A Logic Analyzer Installation Guide

2 Setting up the Hardware for U4154A

Single chassis scenario

The following figure illustrates the connectivity of host PC

and chassis to the network when you are using a single

AXIe chassis with a single host PC.

Figure 8 Connecting a single chassis and a host PC to a network

In this scenario, the connectivity of the host PC and chassis

to a common network is highly recommended for the

firmware upgrades but not mandatory.

If you do not want to connect the chassis to a network, you

can use the Intel PRO/1000 PL network connection. The

PCIe connection between the host PC and chassis creates an

implicit LAN connection which is displayed as the Intel(R)

PRO/1000 PL network adapter in Device Manager on host

PC. Therefore, in such a situation, ensure that the Intel

PRO/1000 PL network connection is operational and

configured to use the static IP address 169.254.1.1 and

subnet mask 255.255.0.0. In case you encounter problems

with using the Intel PRO/1000 PL network connection, refer

to the topic “Troubleshooting ESM Connectivity Issues" on

page 64.

If you connect the chassis to a network, then:

• connect the host PC to that network as well. (This is

mandatory.)

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 67 68

Sin comentarios

Agilent Technologies U4154A Guía de instalación Pagina 32