Agilent Technologies DC110 Especificaciones descargar pdf (Pagina 20)

dataTec ▪ Ferdinand-Lassalle-Str. 52 ▪ 72770 Reutlingen ▪ Tel. 07121 / 51 50 50 ▪ Fax 07121 / 51 50 10 ▪ [email protected] ▪ www.datatec.de

1616

Up to 110 MHz (4-Terminal Pair) SMD

Electrode dimensions

Short compensationOpen compensation Inserting a DUT

Compensation and Measurement: Open and short compensations

are recommended before measurement. Short compensation is

performed by bringing down the shorting plate (which is already on

the fixture) to short all 4 terminals. Open compensation is

performed by bringing down both the open plate and the shorting

plate to separate the high terminals from the low terminals. After

performing open and short compensations, the DUT is inserted into

the test fixture. The figures below show how compensation and

measurement are performed.

Diameter of probe pin is 0.19 mm

Diameter of Blade electrode’s contact spot is 0.5 mm

Spacing between Blade electrode and probe pin is 0.11 mm

SMD can be between 1.6 and 8.0 mm in width

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 79 80

Sin comentarios

Agilent Technologies DC110 Especificaciones Pagina 20