Agilent Technologies 1100 Series Guía de usuario descargar pdf (Pagina 13)

Agilent 1100 Series Valves 7

Installation and Configuration 1

Hardware Installation

Setting up the power connection to other Agilent 1100 Series Modules

The power for the Agilent 1100 Series External Valves can be supplied by one

of the following 1100 Series modules:

• Agilent 1100 Series Preparative Pump (G1361A)

• Agilent 1100 Series Fraction Collector (G1364A, G1364B, G1364C,

G1364D)

• Agilent 1100 Series Well-Plate Autosampler (G1367A)

• Agilent 1100 Series Micro Well-Plate Autosampler (G1377A)

• Agilent 1100 Series Dual Loop Autosampler (G2258A)

Connect the DC-CAN Cable (PN 5181-1533) to the DC-CAN connector at the

back panel of the valve and to the DC-CAN connector on one of the Agilent

1100 Series modules listed above.

Setting up the power connection to the external power supply

If none of the Agilent 1100 Series modules from the list above is part of your

HPLC system, you have to supply the power through an external power supply

(P/N 0950-4422). Plug the DC-CAN adapter from the power supply into the

DC-CAN connector on the back panel of your 1100 Series External Valve.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 77 78

Sin comentarios

Agilent Technologies 1100 Series Guía de usuario Pagina 13