Agilent Technologies N9360A Manual de usuario descargar pdf (Pagina 137)

Screen Reference 5

N9360A Multi UE Tester W-CDMA User Manual 5-21

Softkey Menu

Print Screen: Prints a hardcopy of the screen or stores the screen

image in a USB memory device, according to the "Printer" field

on the [Configuration] screen.

Apply Address: Applies the changes of "IP Addr", "Mask", "Default

Gateway", "Host/Net", "Gateway" and "CIDR" to the Tester. This

softkey is not activated when the [Network Setting] screen is

displayed and no setting is changed. This softkey is activated

when any input field is changed. After applying the settings,

this softkey is inactivated again.

Cancel: Returns to the [Configuration] screen. Values changed

before pressing the Apply Address softkey are reverted to the

former values.

Screen Field

The following input fields need to be set for a new test according

to the following description of Table 5-2.

Table 5-2 [Network Setting] Screen Input Field

Input Field Description

IP Addr Sets the IP address of the Tester. Allowable setting value is as follows:

1.0.0.1 to 223.255.255.255 (From 192.168.1.1 to 192.168.1.255 are unavailable to setting.)

• The IP address setting supports Class A through Class C.

• The Tester does not support Class D (multicast address) and Class E (reserved address).

• The default IP address is "192.168.0.1".

• If the IP address setting fails, "Invalid" is displayed in the Status field.

• Changes to the IP address is effective after pressing the Apply Address softkey.

CIDR (Mask)Sets the subnet mask in CIDR format. Allowable setting value is as follows:

1 to 31

• The default mask value is 24 (255.255.255.0).

• If the mask value setting fails, "Invalid" is displayed in the Status field.

• Changes to the mask setting is effective after pressing the Apply Address softkey.

Refer to “Appendix A Input Fields and Allowable Choices or Ranges" on page A-1 for details.

1 2 ... 132 133 134 135 136 137 138 139 140 141 142 ... 375 376

Sin comentarios

Agilent Technologies N9360A Manual de usuario Pagina 137