Agilent Technologies SMPTE 310M Manual de usuario descargar pdf (Pagina 17)

MPEGscope Plus and MPEGscope Lite

Alternative

configuration

This configuration applies only if your MPEGscope is housed in a Kayak XU PC

(e.g., E6277B or E6277C). It enables you to have both the SMPTE 310M interface

and another optional line interface (e.g., the ASI & Serial ECL (DHEI) interface)

installed at the same time. The configuration requires repositioning all

MPEGscope cards into the first four slots, and replaces Steps 2 and 3 on pages 6

to 8. Follow all other steps as usual.

Remove the blank faceplate

and install the Real-time

Analyzer card into slot 1.

Install the optional line

interface (e.g., the ASI &

Serial ECL (DHEI) interface)

into slot 2.

Attach the IAB ribbon cable to

the MPEGscope main card then

install the card into slot 3.

Connect the ribbon cable from

the MPEGscope main card to the

Real-time Analyzer card.

Connect the IAB ribbon cable from

the MPEGscope main card to the

optional line interface (e.g., the ASI

& Serial ECL (DHEI) interface).

Install the SMPTE 310M

interface card into slot 4.

Remove the cards from slots 2, 3 and 4, disconnecting cables as necessary.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 33 34

Sin comentarios

Agilent Technologies SMPTE 310M Manual de usuario Pagina 17