Agilent Technologies 16700 SERIES LOGIC ANALYSIS SYSTEM 16700 Guía de instalación Pagina 120

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 138
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 119
120 16900 Series Logic Analysis Systems Installation Guide
6 Using and Updating the Logic Analysis System
3 For the interface card location you will be using, using a Torx T10
screwdriver, remove the screw securing the slot cover; then, remove the
slot cover.
4 Insert the interface card into the appropriate slot:
a Ensure that the tab on the board’s rear panel is aligned with the slot
in the deck.
b Press the board securely into the socket on the motherboard.
c Replace the screw.
5 Replace the cover.
T-10 screws (2)
PCI cable
Display cable
Ta b
Slots in deck
CAUTION
When reinstalling the handle assembly, ensure that the screws are torqued to 2.372
Newton meters (21 inch pounds) so that they do not work themselves loose.
Vista de pagina 119
1 2 ... 115 116 117 118 119 120 121 122 123 124 125 ... 137 138

Comentarios a estos manuales

Sin comentarios