Agilent Technologies 16700 SERIES LOGIC ANALYSIS SYSTEM 16700 Guía de instalación descargar pdf (Pagina 31)

Installing Logic Analyzer Cards and Probes 2

16900 Series Logic Analysis Systems Installation Guide 31

16962A Logic Analyzer (2-card, 3-card, and 4-card modules)

Between cards, use a pair of 16960- 61602 flex cables (in the accessory

pouch) to connect the modules.

NOTE

The 16962A logic analyzer module must only be combined with other 16962A modules. A

16962A combined set will default to the lowest memory depth in the set.

NOTE

Turn off the mainframe power before removing, replacing, or installing modules. For

instructions on installing modules into the logic analysis system frame, refer to page 26.

CAUTION

When removing cards that are connected together as multiple-card modules, be sure

to eject the multiple cards simultaneously, otherwise, the flex cables and/or

connectors could be damaged.

Flex Cables

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 137 138

Sin comentarios

Agilent Technologies 16700 SERIES LOGIC ANALYSIS SYSTEM 16700 Guía de instalación Pagina 31