Agilent Technologies E8267D PSG Manual de usuario Pagina 6

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 34
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 5
Output
Minimum settable output power –130 dBm
Maximum output power (dBm)
1
Spec (Typ)
Frequency range
2
CW Standard I/Q
3
Wideband I/Q
4
Option 520
10 to 250 MHz (filters on) +15 (+17) +15 (+16) +11 (+15)
> 0.25 to 2 GHz (filters on) +16 (+17) +16 (+17) +14 (+16)
250 kHz to 10 MHz +14 (+17) +14 (+17) (+14)
> 10 to < 60 MHz +16 (+19) +16 (+19) +14 (+17)
60 to 400 MHz +20 (+21) +20 (+21) +18 (+21)
> 0.4 to 3.2 GHz +21 (+23) +20 (+22) +18 (+20)
> 3.2 to 10 GHz +18 (+23) +18 (+21) +12 (+16)
> 10 to 20 GHz +18 (+22) +18 (+21) +12 (+16)
Option 532 and 544
10 to 250 MHz (filters on) +14 (+16) +14 (+16) +9 (+12)
> 0.25 to 2 GHz (filters on) +15 (+16) +15 (+16) +9 (+13)
250 kHz to 10 MHz +13 (+16) +13 (+17) (+13)
> 10 to < 60 MHz +15 (+18) +15 (+17) +13 (+16)
60 to 400 MHz +19 (+21) +18 (+20) +17 (+20)
> 0.4 to 3.2 GHz +20 (+22) +17 (+20) +17 (+19)
> 3.2 to 10 GHz +14 (+21) +14 (+21) +9 (+13)
> 10 to 20 GHz +14 (+18) +14 (+18) +8 (+14)
> 20 to 32 GHz +14 (+18) +14 (+18) (+14)
> 32 to 40 GHz +12 (+18) +12 (+16) (+13)
> 40 to 44 GHz +10 (+13) +10 (+15) (+13)
Option 520 output power (measured)
Frequency (GHz)
26
24
22
20
18
16
14
0 5 10 15 20
Power (dBm)
0 4 8 12 16 20 24 28 32 36 40 44
Frequency (GHz)
Option 544 output power (measured)
Power (dBm)
26
24
22
20
18
16
14
Maximum available power in CW mode (measured)
1. Maximum power specifications are warranted from 15 to 35 ºC. From 0 to 15 ºC, the performance is typically the same as the warranted specification. From 35 to
55 ºC, the performance is typically 2 dB less than the warranted specification.
2. With Option 1EH low-pass filters below 2 GHz switched off, unless otherwise specified. Specifications above 2 GHz apply with filters on or off.
3. Applies when using the standard I/Q inputs or the internal baseband generator (Option 602) and √(I
2
+ Q
2
) ≥ 0.5 V
rms
.
4. Applies when using the wideband external differential I/Q inputs (Option 016) and √(I
2
+ Q
2
) ≥ 0.2 V
rms
.
6
Vista de pagina 5
1 2 3 4 5 6 7 8 9 10 11 ... 33 34

Comentarios a estos manuales

Sin comentarios