Agilent Technologies MXG (Series A and B) Manual de usuario descargar pdf (Pagina 4)

Agilent N5161A/ 62A/ 81A/ 82A/ 83A MXG Signal Generators Firmware Upgrade Guide

Step 1. Confirm Required Equipment

PC Requirements

450 MHz Pentium

II or higher

Operating System, Windows XP, or Windows 2000 (with Service Pack 4)

128 MB RAM

20 MB free disk space

Internet browser to download firmware files from the Internet, or to view firmware release information on your PC over the Internet.

Either browser must be Java enabled with Java 1.02 or above.

Microsoft

Internet Explorer 4.01 or later

Netscape Navigator 4.0 or later

If upgrading from a CD, a CD–ROM drive

If using GPIB:

• an installed and configured GPIB IO interface card and a GPIB cable

• either the Agilent or National Instruments I/O Libraries

If using LAN:

• an installed and configured LAN interface card and LAN cable

• To connect directly to the PC, use a LAN crossover cable

• To connect to the PC through the LAN, use a 100Base–T LAN cable

If you encounter problems, contact your network administrator.

If using USB:

•an unused USB port

• a USB cable with mini–B connector

• the Agilent I/O Library 14.1 or later or the National Instruments VISA library 4.0 or later, if the Agilent MXG firmware is A.01.20 or later.

1 2 3 4 5 6 7 8 9 10

Sin comentarios

Agilent Technologies MXG (Series A and B) Manual de usuario Pagina 4