
102 Chapter 5
Disassembly
Service Tools
Service Tools
Tools
One or more of the following tools may be required to access and/or
remove various internal assemblies in the Test Set:
• TX-10 torx screwdriver
• TX-15 torx screwdriver
• Flat blade screwdriver
• 1/16-inch allen wrench
• 3/16-inch socket wrench
• 5/16-inch open-end wrench (for SMC connectors)
• 15/64-inch open-end wrench (for SMA connectors)
• 9/16-inch open-end wrench (for BNC connectors)
• 3/4-inch open-end wrench (for Type-N connectors)
Recommended Torque
• Tighten screws until snug. Overtightening can strip screws.
• SMA (RF) connectors: 9.0 lb-in. (102 N-cm)
• SMC (RF) connectors: 6.0 lb-in. (68 N-cm)
• Nuts holding semi-rigid coax to motherboard: 6.0 lb-in. (68 N-cm)
Comentarios a estos manuales