Agilent Technologies E1345A Manual de usuario Pagina 62

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 93
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 61
Relay Multiplexer Command Reference 63
STATus
The STATus subsystem reports the bit values of the Operation Status Register.
Enables the Status Register to set a bit after a bit is set to 1 by the Operation Status
Register.
Subsystem Syntax STATus
:OPERation
:ENABle <
number>
[:EVENt]?
:OPERation:ENABle
STATus:OPERation:ENABle <number> enables the Operation Status Register to
set a bit in the Status Register. For multiplexer modules, when bit 8 in the Operation
Status Register is set to 1, bit 7 in the Status Register is set to 1.
Parameters
Comments Setting Bit 7 of the Status Register: STATus:OPERation:ENABle 256 sets bit
7 of the Status Register to 1 after bit 8 of the Operation Status Register is set to
1.
Related Commands: [ROUTe:]SCAN
Example Enable the Status Register
STAT:OPER:ENAB 256
Enables bit 7 of the Status Register.
Parameter Name Parameter Type Range of Values
<
number>
numeric 1–32768
Vista de pagina 61
1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 92 93

Comentarios a estos manuales

Sin comentarios