Agilent Technologies 6834B Guía de usuario descargar pdf (Pagina 107)

Language Dictionary - 3

107

Trigger Subsystem

This subsystem controls the triggering of the ac source. See Chapter 4 under "Triggering Output

Changes" for an explanation of the Trigger Subsystem. The INITiate commands control the initialization of

both the transient and measurement trigger systems.

NOTE: The trigger subsystem must first be enabled using the INITiate commands or no

triggering action will occur.

Subsystem Syntax

ABORt Resets the trigger system to the Idle state

INITiate

[:IMMediate] Initiates the system for one trigger

:SEQuence[1|3] Initiates a specific numbered sequence

:NAME <name> Initiates a specific named sequence (TRANsient | ACQuire)

:CONTinuous

:SEQuence[1] <bool> Sets continuous initialization

:NAME TRANsient <bool> Sets continuous initialization

TRIGger

[:SEQuence1 | :TRANsient]

[:IMMediate] Triggers the output immediately

:DELay <n>] Sets the trigger delay time

:SOURce <source> Sets the trigger source (BUS | EXT | IMM)

:SEQuence2 | :SYNCronize

:SOURce <source> Sets the synchronous source (PHAse | IMMediate)

:PHASe <n> Sets the synchronous phase reference

:SEQuence3 | :ACQuire

[:IMMediate] Triggers the measurement immediately

:SOURce <source> Sets the trigger source (BUS | EXT | TTLT)

:SEQuence1

:DEFine TRANsient Sets or queries the SEQ1 name

:SEQuence2

:DEFine SYNChronize Sets or queries the SEQ2 name

:SEQuence3

:DEFine ACQuire Sets or queries the SEQ3 name

1 2 ... 102 103 104 105 106 107 108 109 110 111 112 ... 186 187

Sin comentarios

Agilent Technologies 6834B Guía de usuario Pagina 107