Agilent Technologies 53230A Especificaciones descargar pdf (Pagina 208)

Chapter 4 Retrofitting Options

To Retrofit the 53210A Channel 2 Front Panel Input (Option 106 or

Option 115, plus Front Panel Option 202)

208 Assembly-Level Service Guide

6 Assemble the parts in the Option 106/115 package as follows:

NOTE Refer as necessary to Figure 4-8.

– If Option 115 is being installed, insert and tighten the two

supplied standoffs (using a 1/4" spintite) in the two middle

holes closest to the rear flange of the Channel 2 assembly

(Front Panel Option 202 only).

– Position the PC board over the aluminum bracket so that

the SMA edge connector is pointed toward the front flange

(without the hole) and sits on top of the standoffs.

– Install 4 (Option 106) or 6 (Option 115) T10 TORX screws to

secure the PC board to the aluminum deck.

Figure 4-8. 53210A Channel 2 Front Panel Option 106/202

Rear

Flange

Aluminum Deck

Semi-Rigid

Cable Position

Front

Flange

1 2 ... 203 204 205 206 207 208 209 210 211 212 213 ... 259 260

Sin comentarios

Agilent Technologies 53230A Especificaciones Pagina 208