Agilent Technologies U1270 Series Manual de usuario descargar pdf (Pagina 10)

AC specifications for U1272A

Function Range Resolution

Accuracy

45 to

65 Hz

20 Hz to 1

kHz

1 kHz to

5 kHz

5 kHz to

20 kHz

to 100

kHz

True RMS AC

Voltage

[1]

30 mV 0.001 mV 0.6 + 20 0.7 + 25 1.0 + 25 1.0 + 40 3.5 + 40

300 mV 0.01 mV 0.6 + 20 0.7 + 25 1.0 + 25 1.0 + 40 3.5 + 40

3 V 0.0001 V 0.6 + 20 1.0 + 25 1.5 + 25 2.0 + 40 3.5 + 40

30 V 0.001 V 0.6 + 20

1.0 + 25 1.5 + 25 2.0 + 40 3.5 + 40

300 V 0.01 V 0.6 + 20 1.0 + 25 1.5 + 25 2.0 + 40 -

1000 V 0.1 V 0.6 + 20 1.0 + 25 1.5 + 25 - -

LPF (low pass ﬁ lter)

enabled, applicable for

all voltage ranges and

resolution

0.6 + 20

1.0 + 25 @

<200 Hz

5.0 + 25 @

<440 Hz

---

LOW

1000 V 2.0 + 40 2 + 40 @

<440 Hz

---

Function Range Resolution

Accuracy

Burden

voltage/

Shunt

45 to

65 Hz

20 Hz

2 kHz

True RMS

AC Current

[2]

300 µA 0.01 µA 0.6 + 25 0.9 + 25 <0.04 V/ 100 Ω

3000 µA 0.1 µA 0.6 + 25 0.9 + 25 <0.4 V/ 100 Ω

30 mA 0.001 mA 0.6 + 25 0.9 + 25 <0.08 V/ 1 Ω

300 mA 0.01 mA 0.6 + 25

0.9 + 25 <1.00 V/ 1 Ω

3A 0.0001 A 0.8 + 25 1.0 + 25 <0.1 V/ 0.01 Ω

10 A 0.001 A 0.8 + 25 1.0 + 25 <0.3 V/ 0.01 Ω

1. Notes for voltage specifications

• Overload protection: 1000 Vrms. For millivolt measurements, 1000 Vrms for short circuits with <0.3 A current.

• Input impedance: 10 MΩ (nominal) in parallel with <100 pF.

• Z

LOW

impedance: 2 kΩ (nominal)

• The input signal is lower than the product of 20,000,000 V×Hz.

• For 20 to 100 kHz accuracy: Three counts of the LSD per kHz of additional error is to be added for frequencies >20 kHz and signal inputs <10%

of range.

2. Notes for current specifications

• Overload protection for 300 μA to 300 mA range: 0.44 A/1000 V; 10 × 35 mm 30 kA fast-acting fuse

• Overload protection for 3 A to 10 A range: 11 A/1000 V; 10 × 38 mm 30 kA fast-acting fuse

• Specification for 300 mA range: 440 mA continuous.

• Specification for 10 A range: 10 A continuous. Add 0.3% to the specified accuracy when measuring signals >10 to 20 A for 30 seconds

maximum. After measuring currents >10 A, cool down the multimeter for twice the duration of the measured time before proceeding with low

current measurements.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 23 24

Comentarios a estos manuales

Sin comentarios

Agilent Technologies U1270 Series Manual de usuario Pagina 10

Comentarios a estos manuales

Relacionado con productos y manuales para Multímetros Agilent Technologies U1270 Series