Agilent Technologies 16700 SERIES LOGIC ANALYSIS SYSTEM 16700 Guía de instalación Pagina 90

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 150
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 89
90
Chapter 5: Installing Pattern Generator Measurement Modules
16522A Pattern Generator (4-card module)
16522A Pattern Generator (4-card module)
NOTE: Turn off the mainframe power before removing, replacing, or installing
modules following the procedures on page 42.
1 Carefully slide the 4 cards half way into the mainframe slots.
2 Use four 2 x 10 cables to connect the modules. Cable the bottom
Expander Card to the Master Card first. Then cable the upper two
Expander Cards to the Master Card.
3 Gently slide the cabled assembly fully into the frame and tighten the
thumb screws.
Expander
Expander
Master
Expander
2x10
C
able
Vista de pagina 89
1 2 ... 85 86 87 88 89 90 91 92 93 94 95 ... 149 150

Comentarios a estos manuales

Sin comentarios