Agilent Technologies 6002A Guía de usuario descargar pdf (Pagina 289)

How to clean lenses E Cleaning Information

E6000C Mini-OTDR User’s Guide, E0302

289

CAUTION Be careful when using pipe-cleaners, as the core and the

bristles of the pipe-cleaner are hard and can damage the

adapter.

2 Clean the adapter by rubbing a new, dry cotton-swab

over the surface using a small circular movement.

3 Blow away any remaining lint with compressed air.

How to clean lenses

Some lenses have special coatings that are sensitive to

solvents, grease, liquid and mechanical abrasion. Take

extra care when cleaning lenses with these coatings.

Lens assemblies consisting of several lenses are not

normally sealed. Therefore, use as little alcohol as

possible, as it can get between the lenses and in doing so

can change the properties of projection.

Preferred Procedure

Use the following procedure on most occasions.

1 Clean the lens by rubbing a new, dry cotton-swab over

the surface using a small circular movement.

2 Blow away any remaining lint with compressed air.

Procedure for Stubborn Dirt

Use this procedure particularly when there is greasy dirt

on the lens:

1 Moisten a new cotton-swab with isopropyl alcohol.

1 2 ... 284 285 286 287 288 289 290 291 292 293 294 ... 319 320

Sin comentarios

Agilent Technologies 6002A Guía de usuario Pagina 289