Agilent Technologies N2783B Manual de usuario descargar pdf (Pagina 5)

InfiniiMax Active Probe System Overview - InfiniiMax III Probing System

Scope Family Compatible Probes

DSOX90000, DSAX90000 Series N2800A, N2801A, N2802A, N2803A

• Full 30 GHz bandwidth to the probe tip

• Industry’s lowest probe and scope system noise

• Industry’s highest ﬁ delity and accuracy due to bandwidth and extremely low loading

• Probe ampliﬁ ers loaded with measured S-parameters for more accurate response correction

• Bandwidth upgradeable

• Variety of probe heads for different use models with maximum usability

Scope compatibility

Probe Heads

Model

Numbers BW and Input Loading Key Features

Differential browser head N5445A 30 GHz, Cdiff = 35fF, Cse = 50 fF, Rdiff = 100

kΩ, Rse = 50 kΩ

Z axis compliance and variable spacing

from 20 mil to 125 mils, integrated LED

lighting

ZIF probe head/tips N5439A head,

N5440A 450 Ω

tip set, N5447A

200 Ω tip set

28 GHz, Cdiff = 32fF, Cse = 44 fF, with

N5440A: Rdiff = 100 kΩ, Rse = 50 kΩ

With N5447A: Rdiff = 50 kΩ, Rse = 25 kΩ

Extremely low loading, Variable spacing

from 5 mil to 80mil

2.92mm/3.5mm/SMA

probe head

N5444A 28 GHz, N/A, 55 Ω to Vterm Provides termination voltage of ±4V

controlled by scope or externally

Solder-in head N5441A 16 GHz, Cdiff = 77 fF, Cse = 105 fF,

Rdiff=100kΩ, Rse=50kΩ

Economical and semi-permanent connec-

tion, variable span of leads ranges from

5 mil to 80 mil

The Inﬁ niiMax III probing system provides the highest bandwidth and incredibly low loading

to allow for a completely new level of signal ﬁ delity and accuracy. Four different Inﬁ niiMax

III probe ampliﬁ ers ranging from 16 GHz to 30 GHz are available for matching your probing

solution to your performance and budget requirements. A proprietary 200 GHz fT InP (indium

phosphide) IC process with backside ground vias and novel thick ﬁ lm technology is utilized

for the Inﬁ niiMax III probe system to accommodate your highest performance needs and is

unmatched by any product in the market.

Inﬁ niiMax III probe heads

Inﬁ niiMax III probe heads are recommended for Inﬁ niiMax III N2800A/01A/02A/03A probe ampliﬁ ers.

Key features

1 2 3 4 5 6 7 8 9 10 ... 44 45

Comentarios a estos manuales

Sin comentarios

Agilent Technologies N2783B Manual de usuario Pagina 5

Comentarios a estos manuales

Relacionado con productos y manuales para Multímetros Agilent Technologies N2783B