Agilent Technologies E6640A EXM Manual de servicio descargar pdf (Pagina 257)

Chapter 17 257

LTE-FDD Programming Commands

Spectrum Emissions Mask (SEM)

LTE-FDD Programming Commands

Spectrum Emissions Mask (SEM)

This section provides the remote control SCPI commands for the LTE-FDD Spectrum Emissions Mask

(SEM) measurement from within the List Sequencer. This measurement is available only if you have the

LTE-FDD measurement application licensed on the test set.

For more detailed information about the SEM measurement, refer to the online help associated with the

LTE-FDD measurement application, which is also available in PDF format (“User’s and Programmer’s

Reference”) on the Agilent website, www.agilent.com/find/e6640a.

You can also refer to the measurement guide for the X-series LTE-FDD measurement application, which

is available on the Agilent website, www.agilent.com/find/mxa.

SEM measurement SCPI commands

There is a set of SCPI commands available to program the LTE-FDD SEM measurement when it is used

in the LTE-FDD mode. To set up the LTE-FDD measurements from within the Sequence Analyzer mode

you need to prefix the SCPI commands with LSEQuencer:LTE. For example, the [:SENSe]:SEMask

part of the SEM SCPI commands are replaced with: [:SENSe]:LSEQuencer:LTE:SEMask

The following commands are used to set up the SEM measurement.

[:SENSe]:LSEQuencer:LTE:SEMask:TYPE

[:SENSe]:LSEQuencer:LTE:SEMask:BANDwidth[1]|2:INTegration

[:SENSe]:LSEQuencer:LTE:SEMask:FREQuency[1]|2:SPAN

[:SENSe]:LSEQuencer:LTE:SEMask:BANDwidth[1]|2:[:RESolution]

[:SENSe]:LSEQuencer:LTE:SEMask:BANDwidth[1]|2:[:RESolution]:AUTO

[:SENSe]:LSEQuencer:LTE:SEMask:CARRier[:POWer]

[:SENSe]:LSEQuencer:LTE:SEMask:CARRier:AUTO[:STATe]

[:SENSe]:LSEQuencer:LTE:SEMask:CARRier:CPSD

[:SENSe]:LSEQuencer:LTE:SEMask:CARRier:PEAK[:POWer]

[:SENSe]:LSEQuencer:LTE:SEMask:OFFSet[1]|2:LIST:FREQuency:STARt

[:SENSe]:LSEQuencer:LTE:SEMask:OFFSet[1]|2:LIST:STATe

[:SENSe]:LSEQuencer:LTE:SEMask:OFFSet[1]|2:LIST:FREQuency:STOP

[:SENSe]:LSEQuencer:LTE:SEMask:OFFSet[1]|2:LIST:SIDE

[:SENSe]:LSEQuencer:LTE:SEMask:OFFSet[1]|2:LIST:BANDwidth[:RESolution]

[:SENSe]:LSEQuencer:LTE:SEMask:OFFSet[1]|2:LIST:BANDwidth[:RESolution]:AUTO

[:SENSe]:LSEQuencer:LTE:SEMask:OFFSet[1]|2:LIST:BANDwidth:IMULti

[:SENSe]:LSEQuencer:LTE:SEMask:OFFSet[1]|2:LIST:STARt:ABSolute

[:SENSe]:LSEQuencer:LTE:SEMask:OFFSet[1]|2:LIST:STOP:ABSolute

1 2 ... 252 253 254 255 256 257 258 259 260 261 262 ... 339 340

Sin comentarios

Agilent Technologies E6640A EXM Manual de servicio Pagina 257