Agilent Technologies ENA Series Manual de instrucciones descargar pdf (Pagina 27)

Chapter 2 27

Performance Tests

Instruction for Using the Performance Test Software

2. Performance Test

Instruction for Using the Performance Test Software

Setting system controller (USB/GPIB interface)

The test program needs a USB/GPIB interface to control the test equipment from the

E5061A/E5062A.

Follow these steps to set the USB/GPIB interface:

Step 1. Connect the USB port of the E5061A/E5062A to the USB/GPIB interface. The USB/GPIB

Interface Detected dialog box (Figure 2-1) appears.

NOTE Do not connect two or more USB/GPIB interfaces.

Figure 2-1 USB/GPIB Interface Detected dialog box

Step 2. Confirm that VISA Interface Name is set to GPIB0 (1 in Figure 2-1) and SICL Interface

Name is set to hpib7 (2 in Figure 2-1) and then click the

Accept button (3 in Figure 2-1). If

the setting is correct, the procedure is complete. If the setting is different, click the

Edit

button (4 in Figure 2-1).

Step 3. The USB to GPIB Configuration dialog box (Figure 2-2) appears. Make the setting

enclosed in the thick lines in Figure 2-2 (1 in Figure 2-2) according to the figure and then

click the

OK button (2 in Figure 2-2).

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 250 251

Sin comentarios

Agilent Technologies ENA Series Manual de instrucciones Pagina 27