Agilent Technologies 1100 Series Manual de usuario descargar pdf (Pagina 33)

Installing your System

Installing the LAN Communication

Figure 13 Bootp Server

4 Select Configure -> Add Entry to configure the Bootp Manager. The drop

down box “MAC address” lists automatically the MAC address of the installed

JetDirect card (Figure 14).

If no hardware address is found, select Cancel and repeat step 3 and step 4.

5 Specify the Host Name

/&, the IP address , the Comment, e.g.

/&and the Subnet Mask 

NOTE If you are working in a network system, you may need other addresses.

Figure 14 Add Bootp Entry

6 Exit with OK.

7 Select Configure -> Bootp Manager. All entries made above are shown in

Figure 15.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 75 76

Sin comentarios

Agilent Technologies 1100 Series Manual de usuario Pagina 33