Agilent Technologies J3916A Manual de usuario descargar pdf (Pagina 116)

Probe Operation

Restarting the Probe

Selecting the Cold Start Menu Item

Use the following procedure to cold start the probe using the probe’s Main Menu:

1. Connect a local terminal (or a PC emulation a terminal) to the probe. Refer

to “Probe Operation” on page 89 for information on connecting a local

terminal.

2. Press the CONFIG button once (on the back of the probe) to place the probe

into the configuration mode. Use a narrow, pointed object (like a pen) to

press the recessed CONFIG button. The probe then displays its Main Menu

on the terminal. Figure 5-1 on page 94 shows the probe’s Main Menu.

3. Press

to execute a cold start and to exit the probe’s Main Menu. The cold

start occurs immediately. The Activity and Fault LEDs are turned on during

a cold start. When the cold start completes, the Activity LED flashes to

indicate traffic (if present), the Fault LED turns off, and the ~Line On (or

Power) LED is on.

1 2 ... 111 112 113 114 115 116 117 118 119 120 121 ... 178 179

Sin comentarios

Agilent Technologies J3916A Manual de usuario Pagina 116