Agilent Technologies J3916A Manual de usuario descargar pdf (Pagina 120)

Download New Firmware

Downloading Firmware using an HP-UX Workstation and a Terminal

100

Downloading Firmware using an HP-UX Workstation

and a Terminal

The following instructions assume you are using HP-UX 9.0, or later. Before

upgrading firmware, you must first establish an IP connection between your

HP-UX workstation and the probe.

NOTE

The download workstation can be an HP-UX 9.x or later, but the NetMetrix/UX

application is only supported on HP-UX 10.20 and 11.0, or later.

The following steps are required to download firmware to your probe:

1. “Install New Download Firmware on an HP-UX Workstation” below

2. “Download Firmware to the Probe” on page 101

Install New Download Firmware on an HP-UX Workstation

To download a new firmware file to the probe using an HP-UX workstation and a

terminal, the new firmware file must be copied into the

~tftp

directory on your

HP-UX workstation, and the file must be readable by

tftp

. Typically, the

~tftp

directory is

/home/tftpdir

For more information on configuration and usage of

tftp

, refer to your HP-UX

tftp

documentation (typically found in an ARPA Services manual).

1 2 ... 115 116 117 118 119 120 121 122 123 124 125 ... 178 179

Sin comentarios

Agilent Technologies J3916A Manual de usuario Pagina 120