Agilent Technologies J3916A Manual de usuario descargar pdf (Pagina 75)

Installation

Connecting the Probe

NOTE

Do not connect the probe to either the ring-in (RI) or ring-out (RO) connection

port.

The Token-Ring interface can also be connected to a Type 3 MsAU using a Media

Filter. The Media Filter is used to connect from STP (DB-9) to UTP (RJ-45).

Figure 3-7 shows the Token-Ring interface connected to a MsAU using a Media

Filter.

If your network uses the Token-Ring Data Connectors, you need a Type 1 cable

with a Token-Ring Data Connector on one end and a DB-9 connector on the other

end to connect the probe to the ring. Connect the Token-Ring Data Connector plug

to any open port (excluding the RI or RO ports) of a MsAU and connect the DB-9

connector to the probe’s DB-9 connector. Figure 3-8 on page 56 shows the Token-

Ring interface connected to a Type 1 MsAU using Token-Ring Data and DB-9

connectors.

Figure 3-7: Connecting the Probe using a Media Filter

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 178 179

Sin comentarios

Agilent Technologies J3916A Manual de usuario Pagina 75