Agilent Technologies N9360A Manual de usuario Pagina 128

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 354
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 127
5-10 N9360A Multi UE Tester GSM User Manual
5 Screen Reference
Step 2
Insert USB memory device containing the Option Key into the
USB connector on the front panel of the Tester.
Step 3
Press the Option Backup softkey.
Step 4
Confirm Option Backup complete! is appeared on the Message
field of the screen, and remove the memory device from the
tester.
Firmware Update Screen
Insert the USB memory device which stores the firmware in the
USB connector on the front panel of the Tester.
Press the FW Update softkey on the [Configuration] screen
obtained from the [Top Menu] screen to display the [Firmware
Update] screen as Figure 5-7.
The following information is displayed on this screen:
Revision:
The current revision and revision of the firmware stored in
the USB memory device are displayed.
?.??.??:
This is displayed if there is no file for firmware update.
-.--.--:
This is displayed as a version number for an uninstalled
option. Also, the uninstalled option is displayed in white.
•(complete):
This is displayed for the USB version which is updated
successfully.
Vista de pagina 127
1 2 ... 123 124 125 126 127 128 129 130 131 132 133 ... 353 354

Comentarios a estos manuales

Sin comentarios