Agilent Technologies N9360A Manual de usuario descargar pdf (Pagina 148)

5-30 N9360A Multi UE Tester GSM User Manual

5 Screen Reference

Softkey Menu 3

• Simple: Displays a Pass/Fail result of whole measurement in

the middle of the measurement result field in zoom.

• Detail: Displays a Pass/Fail result at each item cell in the

measurement result field.

• Value: Displays a measurement value at each item cell in the

measurement result field.

• Cancel: Cancels changing the display mode and returns to the

softkey menu 1.

Screen Field

The information in the screen field is displayed. Refer to

Table 5-3 [Automatic Test: Stand-by] Screen Input Field on

page 19 and Table 5-6 [Automatic Test: Measuring] Screen

Mobile Phone Information on page 25. The input field in the

screen field can be changed for a new test.

Explanation

Detailed measurement results up to the aborted operation can

be obtained for further analysis from the Detail screen and the

Value screen. Place the circular cursor at one of the Pass/Fail

result or result value cells and press the CURSOR CONTROL

knob to display the Graph/Value screen containing detailed

measurement results.

The status of the Tester is reset to stand-by.

The condition of transmission from the mobile phone is not

ensured; therefore, the mobile phone power-on process needs to

be repeated for a new test.

Sequence 2 Screen

When Sequence 2 is set on the [Configuration: Test Sequence]

screen in the Configuration mode, Sequence 2 start after

completion of BS Release in Sequence 1.

The state of the sequences is shown on the upper left screen.

The sequence in processing (Sequence 2 now) is underlined.

Test result of sequences is shown as follows:

• P: Shown on blue background when the test is passed.

1 2 ... 143 144 145 146 147 148 149 150 151 152 153 ... 353 354

Sin comentarios

Agilent Technologies N9360A Manual de usuario Pagina 148