Agilent Technologies Infiniium 90000 Q-Series Especificaciones descargar pdf (Pagina 90)

Chapter 5: Replacing Assemblies

Removing and Replacing Front Panel Assembly Parts

Remove the four M3 screws (two on each side) connecting the display to the

deck. When reinstalling, torque to 5 in- lbs.

Figure 5-44

Attenuators (20, 25, and 33 GHz Models)

1 Remove the four screws connecting each attenuator to its bracket. When

reconnecting, torque the screws to 8 in- lbs.

2 Remove the four attenuators by removing the nut of the attenuator from the

threads of the 3.5 mm connector. Remove the attenuator from the bracket. When

replacing, use a hand torque wrench to torque the nuts to 8 in- lbs.

Figure 5-45

1 2 ... 85 86 87 88 89 90 91 92 93 94 95 ... 135 136

Sin comentarios

Agilent Technologies Infiniium 90000 Q-Series Especificaciones Pagina 90