Agilent Technologies Infiniium 90000 Q-Series Especificaciones descargar pdf (Pagina 95)

Chapter 5: Replacing Assemblies

Removing and Replacing the Acquisition Boards/Backplane Assembly

Disconnect the cables from the rear panel (four cables for 33 GHz and lower

models; six cables for 50 GHz and 62 GHz models), using 5/8 (left photo) and

5/16 (right photo) drivers. When reconnecting, torque the nut and washers to

18 in- lbs.

Figure 5-54

If you need to replace the oscillator board, remove the four M3 screws connecting

the board to its tray and disconnect all attached cables. When replacing, torque

the screws to 5 in- lbs and torque SMA connectors to 8 in- lbs using a 5/16-

inch hand torque wrench.

Figure 5-55

Remove the two screws connecting the backplane deck to the chassis.

Figure 5-56

1 2 ... 90 91 92 93 94 95 96 97 98 99 100 ... 135 136

Sin comentarios

Agilent Technologies Infiniium 90000 Q-Series Especificaciones Pagina 95